Clatters Machines
〰️
Knob Technology
〰️
Neutral Labs
〰️
Flora Synths
〰️
Tesseract Modular
〰️
Xaoc Devices
〰️
Herzlich Labs
〰️
Clatters Machines 〰️ Knob Technology 〰️ Neutral Labs 〰️ Flora Synths 〰️ Tesseract Modular 〰️ Xaoc Devices 〰️ Herzlich Labs 〰️
Featured in Eurorack
Mix it up with the Micro Mix, a dual passive mixer in 2hp that functions as both a 3-to-1 and a 6-to-1 passive mixer, allowing you to perform acts of minor sorcery in your modular system (or maybe outside with your Volca and Pocket Operator jam?).
Nothing knobs or buttons here to confuse you, plug in either audio, CV, clock or triggers, and get the mixed signal out. The best part? Since it's passive, there's no guarantee what you put in is exactly what you'll get out. Embrace the unpredictable world of passive mixing like they did in the 60s and 70s.
Go ahead, spend your money, you'll be very glad you did.
Size: 2 HP
The Stoel Music Systems Dual Lin/Log VCA is a versatile module featuring two voltage-controlled amplifiers with a switchable response. The logarithmic setting is generally used for audio, and the linear response is more suited to modulating control signals. However, the responses can be interchanged to generate unique effects.
All Stoel Music Systems modules feature aluminum front panels with a durable high-gloss white finish. For a crisp appearance and exceptional durability, the front panel markings are digitally printed at high-resolution with UV-cured ink. Mounting holes are plated to significantly reduce screw rash. The power connection features polarity protection to prevent accidental damage to the module if it is connected backward.
Each module includes a 12” long 10-pin to 16-pin ribbon cable compatible with the Eurorack standard, M3 mounting screws, and a complimentary sticker.
Model EM1206
Size: 8 HP
Tama12 is a very flexible second order 12db active low pass filter.
Based in OTA Tama12 is full of character and aggressiveness. It has two control knobs. One for the cutoff frequency, one for the resonance and a CV input for controlling the cutoff frequency.
Size: 8hp
– Analogue voltage controlled oscillator
– Built-in Self-Tuning function
– Manual Fine Tune
– 3-wave mixer: Square, Saw-tooth & Triangle
– Signal level LEDs
– 6 HP Eurorack width
– Easy to control & use
The Duskwork Self-Tuning VCO III is designed & built for Eurorack systems, requiring an external +/-12v power supply as per the Eurorack standard. It is just 6HP in width, so it’s easy to fit into any system; from a small skiff to a studio wall.
It contains an in-built Self-Tuning circuit, so gone are the days of finding your tuner. Just hold down a C note on your 1v/oct keyboard and hit tune – wait for the green LED to light up again, and then it will be perfectly in tune. These days, many of us wish to de-tune our VCO’s, and that’s why this updated version of the VCO now has its own manual fine tune knob in addition to the Self-Tuning function.
Another useful feature of this VCO, is the in-built 3 wave mixer. You can mix the 3 waves to your preference; Triangle, Saw-Tooth & Square. Each wave has its own signal LED so that you can tell how loud each wave is at just a glance. There is just one audio output, so no need to keep moving cables if you wanted to change the oscillator source sound.
Size: 6hp
Clatters Machines Garden Listener, Crazy Chicken F.A.T., Bear Modules FADE, MachineRoom Prodigy Dual VCO
Modules on sale!
WILDSYNC ADSR 4001
The WILDSYNC ADSR 4001 is a versatile ADSR/AD envelope generator.
It features both ADSR and AD modes, allowing for flexible envelope shaping.
In AD mode, it offers a looping function, controlled by gate logic, to create evolving, rhythmic patterns.
The module provides three timing ranges (short, medium, long) to accommodate a wide variety of musical applications, from snappy percussive hits to slow, evolving pads.
A manual gate button allows for hands-on experimentation and real-time control.
The retrigger input ensures precise control over the envelope cycles, ideal for complex rhythmic sequences.
The module outputs both normal and inverted envelope signals, offering even more creative possibilities in sound design.
ADSR Envelope Generator
- ADSR or AD mode
- LOOP in AD mode (which GATE logic control)
- Three timing ranges S/M/L
- Manual GATE button
- Retrigger input
- Normal and Inverted outputs
Depth: 30 mm deep
Current Draw
55 mA +12V
45 mA -12V
Size: 6 HP
Chord v2 is a plug-and-play solution for bringing musical polyphony to your system. It contains four oscillator voices, a multitude of waveforms, and intelligent tuning functionality. This new version features an expanded sonic palette and feature set in half the size of the original.
It features three primary modes of operation: Chord, Free Running, and Unison. These three modes allow the oscillators to be tuned as diatonic chords, run independently of each other, or be tuned to the same internal frequency for external v/oct sequencing through independent CV inputs.
The timbral possibilities of the Chord v2 bring its polyphonic tones to life. The module ships with eight banks of waveforms encompassing traditional shapes, vocal synthesis, organ emulation, and chiptune sounds. You can also load custom wavetables using the SD card slot on the front panel.
From harmonic drones to Switched On Bach, the Chord v2 is an unparalleled addition to any Eurorack modular.
Polyphonic oscillator
Intelligent tuning system
Independent output per voice + mix output(5 in total)
Eight banks of waveforms
SD card included
Wavetables compatible with WaveEdit software by Synthesis Technology
Aluminum Front Panel
Download The Chord v2 Manual here
Size: 14 HP
The Stoel Music Systems Buffered multiple provides precise distribution of control voltages to up to eight destinations. When splitting a control voltage, the voltage will often drop as it is divided to more destinations. This can be a significant problem, especially when controlling the pitch of oscillators. This module provides a separate unity gain buffer amplifier for each output, ensuring that splitting the signal will not affect the level. Both CV and audio signals can be distributed with this module.
All Stoel Music Systems modules feature aluminum front panels with a durable high-gloss white finish. For a crisp appearance and exceptional durability, the front panel markings are digitally printed at high resolution with UV-cured ink. Mounting holes are plated to significantly reduce screw rash. The power connection features polarity protection to prevent accidental damage to the module if it is connected backward.
Each module includes a 12” long 10-pin to 16-pin ribbon cable compatible with the Eurorack standard, M3 mounting screws, and a complimentary sticker.
Size: 4 HP
This module is available in black color.
Sibilla is a DSP digital stereo oscillator that aims to translate into music the beauty and harshness of a semi-barren mountain. Its sound is sculpted by various saw and sine waves running through intricate delay networks, altered by LFOs, white noises, and creating constructive and destructive interferences.
Both stereo channels are the output stages of two feedback audio loops.
Each loop is made up by a main sub-sinusoidal wave oscillator and two saw and sine waves with frequencies affected by the generation of harmonics (right channel) and subharmonics (left channel). All waves have different phases whose offset is constantly affected by minor variations created by two pairs of grains randomly fluctuating within the waves amplitude spectrum and being sampled at a certain speed.
Waves then meet to each other to a common point, together with two white noise sources, creating constructive and destructive interferences constantly affected by two LFO’s movements.
Interferences are then run into a resonant low pass filter and then distributed to four different delay lines from which they are fed back into the audio loops at different time intervals depending on the grains movements.
Manual: https://clattersmachines.com/wp-content/uploads/2023/03/Sibilla_manual.pdf
Size: 10HP
Envelope follower, amp, gate and trigger generator.
Size: 6HP
Pack of short and simple patch cables from Erica Synths.
Super handy through-hole gauge and ruler for drafting and designing.
As Mitch from Hack Modular says, this is a crucial tool for me, I wish I had made it sooner! A lot of his designs require exact tolerances and answers to unusual questions. Guessing these, even with calipers, can lead to expensive and time consuming mistakes. Never trust datasheets!
Constantly useful for visualising ideas and as a template for panel layouts in your notebook.
Numbers are oppositely orientated on either side so that you can measure a line from above or below without having to read upside down.
Plus it's a Eurorack panel!
Other PCB design tools:
* PCB Slot Gauge
* PCB Thickness Gauge Set
100% recyclable packaging.
Radioactive is a small but powerful 14-bit analog modelling voltage-controlled digital sound source: a complete voice Eurorack module in 6HP. It consists of 3 simultaneous independent oscillators, voltage-controlled AR/ASR transient generator, voltage-controlled pitch slew (glide) and voltage-controlled waveshaper with 5 different modes, but that's just the beginning. Its forte consists of selectable gate/trigger/constant envelope timing signals, rather unique 3-voice polyphonic mode, semitone-quantized mode, voltage-controlled waveform selection, on-the-fly selectable 10Vpp CV input range with offset (except for Pitch), a few experimental features, and then some.
Under the hood, it's a chiptune-inspired wavetable-gnawing sound cruncher with a mind of it's own, and oh boy it's dirty. It could be described as raw and untamed, but it would probably be an understatement.
Operation
V/Oct Pitch input with attenuator
3 CV inputs with offset (Glide/Attack, Release, Shaper)
Trig/Gate input for envelope triggering/gating
Wave change trigger input
Single button with 3 different functions: waveform change with short press, shift function (alternate control parameter) with long press, enter setup mode on power-up.
3 green illuminated indicators of selected waveform and their combinations, also providing information in setup mode
Single red illuminated indicator of incoming trigger or high/low gate signal
Simple and intuitive setup without menu diving (parameters are saved and recalled at start-up)
3 different operation modes (A, B & C) selectable in setup:
A - Free range oscillator with Attack and Release envelope
B - Free range oscillator with Release envelope and Glide
C - Quantized oscillator with Release envelope and Glide
3 different envelope activation modes (G, T & P) selectable in setup:
G - Gate mode, monophonic
T - Trigger mode, monophonic
P - Poly mode, 3-voice polyphonic
5 different wave shaper modes selectable in setup and at runtime
9 basic waveforms and 12 different combinations
Specifications
VCDO sound source with thousands of possible waveform shapes
All inputs: 100k impedance, 512Hz DC rate
32kHz refresh rate
14-bit sound generation
10-bit CV capture
V/oct input range: 0 to +5V (C1-C6 with octave shift control to cover the entire C0-C8 range)
CV input range: on-the-fly selectable 0 to 10V, -5 to +5V or any other 10Vpp range between -10 and +10V
Trig/Gate input range: 0 to +10V (0V closed, 3V+ open), protected
Output levels: -5V to +5V (10Vpp), envelope/shaper mode dependable
Professionally designed front panel with all linked functions clearly labeled in different colours
42 mA +12V
10 mA -12V
0 mA 5V
25 mm deep
Radioactive 1.2 does not require calibration, do not flash it with 1.1 firmware (unless you like magic smoke)
links:
Firmware Radioactive 11r01.zip:
https://www.dropbox.com/s/xqmxl1jrqjoce9i/Radioactive%2011r01.zip?dl=1.
Radioactive v1.1 BOM.xlsx:
https://www.dropbox.com/s/ahb5o40z0nuuf4v/Radioactive%20v1.1%20BOM.xlsx?dl=1
Radioactive v1.1. Build guide:
https://drive.google.com/open?id=1e3fh5Ky4Uqqt0wBZhjzI9mP86zWRSHtg
Radioactive v1.1. User guide.pdf:
https://www.dropbox.com/s/wk55gvgzy63afj0/Radioactive%20v1.1%20User%20guide.pdf?dl=1.
Tesseract Radioactive 1.1. ibom.html:
https://www.dropbox.com/s/7moykgm94qwymyh/Tesseract%20Radioactive%201.1%20ibom.html?dl=1
passive mult 3 + 3 + 4 with normalization
Size: 2hp
Elmyra 2 White Desktop by Neutral Labs
Other featured products
Pocket SCÍON is a portable device that captures biofeedback data sourced from contact with living organisms. This data is used by an onboard sound engine to generate evolving soundscapes, a range of MIDI messages and biofeedback data which is made accessible via the accompanying desktop application.
Anyone can create, shape and enjoy music with Pocket SCÍON, regardless of existing musical experience. Despite its stand-alone, plug-and-play interface, experienced or adventurous users can use the MIDI and OSC output capabilities to integrate Pocket SCÍON into their studios, installations and audio-visual projects.
Pocket SCÍON includes instruments created exclusively for the device, made in collaboration with Tarun Nayar (Modern Biology), an ecologist, musician and prolific user of our Eurorack format SCÍON module.
SCÍON | ‘sö:ən| noun: (biology) young shoot or stem useful for sprouting or forming new roots, descendant of a noble family
Metal Fetishist from Body Synths is a compact, digital percussion synthesizer with CV connections and onboard random sequencing. Sounds are generated using a noise generator and oscillator to create engaging and dynamic rhythms. Using the Random Step Mod and Random Skips knobs, you can introduce random fluctuations based on the Tempo and the number of steps is determined by the Turning machine-inspired Steps knob. Send this information to the Pitch, Noise, or Cutoff and control these parameters manually, as well. Interface directly with your Eurorack environment using the 8 patch points and plug an audio source directly into the Metal Fetishist for audio processing, passing through the filter and distortion. Metal Fetishist by Body Synths is a unique way to create abrasive, hard-hitting percussion.
Features:
Oscillator and Noise-based sound source
Internal randomness sequencer goes from 0–32 steps
Sequencer can be routed to Pitch, Noise, or Cutoff
Random Step Mod and Random Skips introduce uncertainty
Noise knobs functions as a crossfader from Osc-to-Noise
High and Low pass filter switch with Cutoff and Resonance
3x Decay envelopes for Pitch, Cutoff, and Volume
Trigger, Clock, and Stepmod CV outputs
Tigger, Clock, Pitch, Cutoff, and Noise CV inputs
Distortion in two flavors: Corrosion for basic and Rust for a downsampling varietal
Audio input goes through Filter and Distortion
The successor to the widely acclaimed Elmyra, Elmyra 2 is a 4-voice digital/analog hybrid drone synthesizer and platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.
Feature overview:
4 independent voices activated by touch or CV
wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible
chromatic mode makes chords and harmonic sounds possible, microtonal scales supported
41 patch points
31 modulation targets
touchpads with analog envelopes that can be used as modulation sources
resonant filter switchable between:
boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)
creamy 4-pole low-pass ladder filter
delay with unhealthy amounts of feedback
lo-fi reverb
analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering
sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel
preset cards can be used with other Neutral Labs modules
external audio can be processed via audio input
9 per-voice modulations and effects:
unison detune
dual sub-oscillators
saturation
bitmangler
sample rate reduction
noise
high-pass filter
low-pass filter
2 LFOs: 1 sine, 1 complex morphable
4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures
delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)
utilities
dual attenuator/buffered multiple/voltage generator
CV summing circuit
solid bamboo case
boutique synth handmade in Germany
Supports preset cards (Nuts).Can be found here.
Downloads:
Size: 42 HP
The successor to the widely acclaimed Elmyra, Elmyra 2 is a 4-voice digital/analog hybrid drone synthesizer and platform for microtonal sonic exploration, capable of creating anything from lush ambient soundscapes to gritty droning textures and shrieking noises, available as a 42 HP Eurorack module or semi-modular desktop synth. With 31 modulation targets, 4 polymetric sequencers, delay, additional per-voice effects, a choice of various filters, as well as onboard LFOs and utilities, it is essentially a purpose-built small modular system in itself. A set of preset cards (included) or electronic components like capacitors or diodes can be plugged into the front panel in order to change the sound character.
Feature overview:
4 independent voices activated by touch or CV
wavetable-based complex oscillator engine, up to 12 oscillators in total, 1V/octave compatible
chromatic mode makes chords and harmonic sounds possible, microtonal scales supported
41 patch points
31 modulation targets
touchpads with analog envelopes that can be used as modulation sources
resonant filter switchable between:
boomy and aggressive multimode 2-pole state variable filter (low-pass, band-pass, high-pass)
creamy 4-pole low-pass ladder filter
delay with unhealthy amounts of feedback
lo-fi reverb
analog OUCH circuit: a unique combination of destructive distortion, waveshaping and filtering
sonic character can be customised by using special preset cards (set of 4 included) or components like diodes that can be plugged into the front panel
preset cards can be used with other Neutral Labs modules
external audio can be processed via audio input
9 per-voice modulations and effects:
unison detune
dual sub-oscillators
saturation
bitmangler
sample rate reduction
noise
high-pass filter
low-pass filter
2 LFOs: 1 sine, 1 complex morphable
4 sequencers with arbitrary step length per voice (up to 128), allows polymetric structures
delay time and LFOs can be clock-synced or unsynced (tap tempo is also possible)
utilities
dual attenuator/buffered multiple/voltage generator
CV summing circuit
solid bamboo case
boutique synth handmade in Germany
Supports preset cards (Nuts). Can be found here.
Downloads:
Size: 42 HP
SYNTH GEMS 1 is your guide to an eclectic and amazing collection of synthesizers as art. Experience the history, technology, and sonic innovation of electronic music in a completely new way.
As much for serious synth enthusiasts as for newcomers to electronic music, SYNTH GEMS 1 is an enlightening look into the wonderful world of vintage synthesizers.
60+ selected vintage synthesizers
330+ unique color photos
Foreword by master synthesist Vince Clarke
320 colorful pages printed on high-quality certified-ecofriendly paper
Hardcover format (9.8" x 9.8" / 25 x 25 cm)
An art gallery of electronic aesthetics
SYNTH GEMS 1 takes you on a tour of over 60 remarkable keyboards — large and small, famed and rare, elegant, beautiful, and brutal… and ranging from classics that define entire genres to rare oddities that bring their own grace to the world.
Each synthesizer is presented in a series of finely detailed photographs, with a discussion of its origins and importance. From the dawn of commercial synthesis to the close of the Twentieth Century, the lives and times of these unique instruments are chronicled in exquisite pictures and thoughtful stories – mingling music, technology, commerce, and visual art.
Meet the synthesizer
Besides a brief introduction to the basic elements of synthesizer design, as well as a comprehensive Glossary, the book is rounded out by tours of the three museums that opened their collections to be photographed, and a selection of resources for further study: books, films, educational initiatives, online resources – even ways to play with these sounds at home.
Known classics and significant rarities
Explore the designs and read the stories behind instruments from famous brands such as ARP, Casio, Clavia, Korg, Moog, Oberheim, Roland, Sequential, and Yamaha – as well as vintage gems from Crumar, Electronic Dream Plant, Elgam, E-mu, Ensoniq, Fairlight, Kawai, Gleeman, Lord Synthesisers, Steiner-Parker, Technics, Waldorf, and more.
Announcing Flora Quatrovertalius
Four channels of chained attenuversion.
Use it as an attenuator, inverter, offset generator and mixer.
Eurorack
Other products
Flora Synths Blank Panel in traditional black color.
Size: 4 HP